|
Category
类 别 |
Trade-
mark
牌 号 |
Chemical
composition
化学成份(%) |
Hardness
硬 度 |
Application
用 途
|
|
Oxy-
Acetylene
Flame
spray-
using
氧
乙
炔
焰
喷
焊 |
F103 |
Cr10 B1.5 Si3 Ni Rem. |
HRc 25 |
Spray-fusing of cast iron parts, such as die for glass, cylinder, and guide.
铸铁件的喷焊，如玻璃模具，汽缸、导轨 |
|
F101 |
Cr10 B2.5 Si3 Ni Rem. |
HRc 45 |
Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump.
耐磨、耐蚀件的喷焊，如阀门、泵转子、泵柱塞 |
|
F101Fe |
Cr10 B2.5 Si3 Fe10
Ni Rem. |
HRc 45 |
Spray-fusing of corrosion-resistant parts, such as axle and stigma.
耐磨件的喷焊，如轴类、汽门 |
|
F102 |
Cr16 B4 Si4 Ni Rem. |
HRc 60 |
Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston.
耐磨、耐蚀、抗高温氧化工件的喷焊，如模具、柱塞 |
|
F102Fe |
Cr16 B4 Si4 Fe15
Ni Rem. |
HRc 60 |
Spray-fusing of corrosion-resistant parts, such as axle and cold die.
耐磨件的喷焊，如轴类、冷模具 |
|
F105 |
F102+50%WC |
HRc 60 |
Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan.
抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片 |
|
F105Fe |
F102Fe+35%WC |
HRc 60 |
Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan.
抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片 |
|
F108 |
F102+80%WC |
HRc 60 |
Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger.
抗强烈磨粒磨损，无需加工场合的喷焊，如挖泥船耙齿 |
|
F301 |
Cr5 B4 Si4 Ni30
Fe Rem. |
HRc 45 |
Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree.
农机,矿山机械易损件的喷焊，如齿轮，车轴 |
|
Track iron powder
轨铁粉 |
Cr5 B1.5 Si3 Ni30
Fe Rem. |
HRc 28 |
Repair spray-fusing of defects such as scratch and concavity of railroad track.
铁路钢轨擦伤、低塌等缺陷的修复喷焊 |
|
Oxy-acetylene flame spraying
氧
乙
炔
焰
喷
涂 |
F111 |
Cr5 B1.5 Si3 Ni30
Fe Rem. |
HB 150 |
Spraying of bearing and cutting parts etc.
轴承、切削件等的喷涂 |
|
F113 |
Cr10 B1.5 Si3 Ni Rem. |
HB 250 |
Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance.
喷涂亦可喷焊，如滚筒、柱塞、耐蚀耐磨轴等 |
|
F313 |
Cr15 B1.5 Fe Rem. |
HB 250 |
Spraying of dryer of papermaking and axle.
造纸烘缸、轴类的喷涂 |
|
F314 |
Cr18 Ni9 B1.5 Fe Rem. |
HB 250 |
Spraying of axle.
轴类喷涂 |
|
F412 |
Sn10 P0.3 Cu Rem. |
HB 80 |
Spraying of axle and bearing.
轴、轴承的喷涂 |
|
F512 |
复合Al5Ni95 |
|
Backing spray of transition layer between base and working layer.
喷涂层的基体与工作层之间过渡（打底）层用喷涂 |
|
PTA
hardfacing
等
离
子
弧
喷
焊 |
F221 |
Cr26 W5 B0.7 Co Rem. |
HRc 43 |
PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool.
高温高压阀门密封面、热剪切刃口的等离子喷焊 |
|
F223 |
Cr21 W5 B1.5 Co Rem. |
HRc 40 |
PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower.
高温下耐磨耐蚀件的喷焊，如高温高压阀门、鼓风机 |
|
F321 |
Cr13 B1.5 Si1 Fe Rem. |
HRc 45 |
PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc.
中温中压阀门的闸板及其他耐磨件的等离子喷焊 |
|
F322 |
Cr23 Ni13 Si5 B1
Fe Rem. |
HRc 40 |
PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc.
中温中压阀门的阀座及其他耐磨件的等离子喷焊 |
|
F422 |
Sn10 P0.3 Cu Rem. |
HB 80 |
PTA hardfacing of axle and bearing etc.
轴、轴承等离子喷焊 |
